Audio Input; Default Mode; Audio Delay; Multi Input Setup - Rotel RSP-1582 Manuel De L'utilisateur

24
AUDIO INPUT: Assigns a physical input connection for the source displayed
in the first line of the menu. Options include Optical 1–3, Coax 1–3,
Analog 1-4, HDMI Audio, Tuner, Multi Input, XLR, Phono, CD, Bluetooth,
USB or PC-USB.
NOTE: Optical, coaxial,CD and XLR inputs can be assigned to the CD
input source or Video 1-8.
NOTE: Audio input is not available to the XLR, PHONO, TUNER, MULTI
INPUT, BLUETOOTH or USB input source.
When selecting the input source for "PC-USB", AUDIO INPUT can be
changed to "USB Audio 1.0" or "USB Audio 2.0". USB Audio Class 2.0
may require installation of the PC driver. For more information please see
PC USB section in this manual.
TRIGGER OUTPUT: The RSP-1582 has three 12V trigger outputs (labeled 1
– 3) that supply a 12V DC signal to turn on other components as needed.
This menu item turns on specific 12V trigger outputs whenever the indicated
input source is selected. For example, configure the VIDEO 1 input to turn
on the 12V trigger for your DVD player. Any combination of trigger outputs
can be programmed for each source.
1. Place the highlight on the option "TRIGGER OUTPUT" and press the
ENTER button on the remote control or front panel.
2. Press the Up/Down arrow buttons on the remote control or front panel
to change the first position from blank to 1 (activating TRIGGER 1 for
that source) and use to the Left/Right arrow buttons move to the next
position.
3. Repeat until all three positions are set as desired. The final press of
the ENTER button confirms the selection.
NOTE: The 12V trigger output 1 is defaulted to be turned on for all
input sources. You can turn it off by following the steps as above.
DEFAULT MODE: The DEFAULT MODE setting allows you to set a default
surround sound mode for each source input. The default setting will be used
unless the source material triggers automatic decoding of a particular type
or unless the default setting is temporarily overridden by the front panel or
remote surround mode buttons.
Options for the default surround modes are: Dolby PLIIx, Dolby 3 Stereo, 5
channel Stereo, 7 channel Stereo, PCM 2 CH, DTS Neo:6, Analog Bypass
(for analog input only) and Source Dependant.
NOTE: The following types of digital discs or source material are
generally detected automatically and the proper decoding activated
with no action or setting required: DTS, DTS-ES Matrix 6.1, DTS-ES
Discrete 6.1, Dolby Digital, Dolby Digital Surround EX, Dolby Digital
Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-HD High Resolution
Audio, Dolby Digital 2-channel, PCM 2-Channel, PCM 96kHz and MP3.
Since Dolby Digital 5.1 and DTS sources are detected and decoded
automatically, the default setting typically tells the unit how to process a
2-channel stereo signal. For example, you might have your CD input default
to 2-channel stereo, DVD and game console inputs default to Dolby Pro
Logic II processing for matrix-encoded Dolby surround material, and TUNER
input default to 5 Channel Stereo mode.
RSP-1582 Surround Sound Processor
In some cases, the default setting can be manually overridden by the SUR+
button on the remote control or front panel, or 2CH, PLCM, BYPASS buttons
on the remote control. See the Manually Selecting Surround Modes section
of this manual for more information on which settings can be overridden.
Two of the default surround mode settings available on this menu offer
additional choices. Dolby Pro Logic II decoding offers a choice of Movie,
Music or Game settings, etc. DTS Neo:6 decoding also offers a choice of
CINEMA or MUSIC settings. When either Dolby Pro Logic II or DTS Neo:6 is
selected with this menu item, the current setting choice will also be displayed
on the DEFAULT MODE line. To change from MUSIC to other modes enter
the sub-menu by pressing ENTER on the remote control or front panel.
AUDIO DELAY: Also known as "lip-sync" delay, this setting delays the audio
signal for an input by the specified amount to match the video input. This
feature can be useful when the video signal is delayed more than the audio
signal as sometimes happens with upconverted digital TV processors.
The range of available settings is from 0 ms to 500 ms, in 10 ms. The setting
is individually stored for each input and is the default Audio Delay each
time that input is selected.
LEVEL ADJUST: Use this feature to set the volume level lower than the other
inputs. This feature is useful for sources that are consistently higher in volume
than other sources in the system.
Press the SETUP button on the remote control or MENU button on the front
panel to exit the menu and return to normal operation.

Multi Input Setup

VIDEO INPUT : HDMI1
TRIGGER OUTPUT : 1 _ _
LEVEL ADJUST : 0dB
When the MULTI INPUT source is selected on the INPUT SETUP menu, the
available options change to reflect the fact that these inputs are direct analog
inputs and bypass the unit's digital processing. The AUDIO INPUT, DEFAULT
MODE and AUDIO DELAY options are not available since these functions
are processed digitally and not available to the MULTI INPUT source.

Dolby Pro Logic IIx

DOLBY PRO LOGIC IIX SETUP
OPTIONAL PARAMETER
PANORAMA : Off
DIMENSION : 3
CENTER WIDTH : 3
When "Dolby PLIIx " is selected as the default surround mode on the INPUT
SETUP menu, there are additional settings and parameters to optimize the
surround decoding for music or movie soundtracks. Dolby Pro Logic II uses
INPUT SETUP
SOURCE : MULTI INPUT
NAME : M-INPUT
BACK
MODE : Movie
BACK