Getting Started; A Few Precautions; Placement; Ac Power And Control - Rotel RB-981 Guide D'utilisation

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Getting Started

Thank you for purchasing the Rotel RB-981 Stereo Power Ampli-
fier. When used in a high-quality music or home theater system, it
will provide years of musical enjoyment.
The RB-981 is a high-power, two-channel power amplifier, provid-
ing the highest level of audio performance. Discrete output de-
vices, a massive power supply, premium components, and Rotel's
Balanced Design ensure superb sound quality. High current capa-
bility allows the RB-981 to drive the most demanding loudspeakers.
Be aware that the RB-981 is capable of high power levels, in ex-
cess of 130 watts per channel. Make sure that your speakers can
handle the power of the RB-981. If in doubt about your speakers,
ask your local Rotel audio retailer for advice.
The RB-981 is straightforward in its installation and operation. If
you have experience with other stereo power amplifiers, you
shouldn't find anything perplexing. Plug in a pair of high-quality
RCA cables from your preamp into the amplifier inputs, wire up
your speakers, and enjoy.

A Few Precautions

Please read this manual carefully. In addition to basic installation
and operating instructions, it provides valuable information on
various RB-981 system configurations as well as general informa-
tion that will help you get optimum performance from your system.
Please contact your authorized Rotel audio retailer for answers to
any questions you might have. In addition, all of us at Rotel wel-
come your questions and comments.
Save the RB-981 shipping carton and all enclosed packing mate-
rial for future use. Shipping or moving the RB-981 in anything
other than the original packing material may result in severe dam-
age to your amplifier.
Fill out and send in the owner's registration card packed with the
RB-981. Also be sure to keep the original sales receipt. It is your
best record of the date of purchase, which you will need in the
event warranty service is ever required.

Placement

Because of its high power output, the RB-981 may generate con-
siderable heat. The heat sinks and ventilation openings in the am-
plifier are more than capable of dissipating this heat under normal
conditions, but don't smother your amplifier. There must be ad-
equate clearance around the chassis. The ventilation slots in the
top cover must be unblocked, and there must be reasonable air-
flow around the amplifier. Use common sense when placing the
amplifier in a cabinet or when stacking other equipment.
Likewise, remember the weight of the amplifier when you select
an installation location. Make sure that the shelf or cabinet can
support its considerable bulk. Again, use common sense.
2
All manuals and user guides at all-guides.com
STEREO POWER AMPLIFIER RB-981
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

AC Power and Control

AC Power Input

7
Because of its high power rating, the RB-981 can draw consider-
able current. Therefore, it should be plugged directly into a 2-pin
polarized wall outlet. Do not use an extension cord. A heavy duty
multi-tap power outlet strip may be used if it (and the wall outlet)
is rated to handle the current demanded by the RB-981 and all the
other components connected to it.
Be sure the power switch on the front panel of the RB-981 is
turned off (in the out position). Then, connect the supplied power
cord to the AC power outlet.
Your RB-981 is configured at the factory for the proper AC line
voltage in the country where you purchased it (either 115 volts AC
or 230 volts AC with a line frequency of either 50 Hz or 60 Hz). The
AC line configuration is noted on a decal on the back panel.
Note: Should you move your RB-981 amplifier to another country,
it is possible to reconfigure your amplifier for use on a different
line voltage. Do not attempt to perform this conversion yourself.
Opening the enclosure of the RB-981 exposes you to dangerous
voltages. Consult a qualified service person or the Rotel factory
service department for information.
If you are going to be away from home for an extended period of
time such as a month-long vacation, it is a sensible precaution to
unplug your amplifier (as well as other audio and video compo-
nents) while you are away.
Power Switch and Power Indicator
1
The power switch is located on the front panel of your amplifier.
To turn the amplifier on, push the switch in. The LED indicator
above the switch will light, indicating that the amplifier is turned
on. To turn the amplifier off, push the button again and return it to
the out position.

Protection Circuitry

The RB-981 features a thermal protection circuit that protects the
amplifier against potential damage in the event of extreme or
faulty operating conditions. Unlike many designs, the RB-981's
protection circuit is independent of the audio signal and has no
impact on sonic performance. Instead, the protection circuit
monitors the temperature of the output devices and shuts down
the amplifier if temperatures exceed safe limits.
2
3