Accessories; Technical Data - Hilti PRE 3 Mode D'emploi

2.12 Charge status of the Li‑ion battery during charging while not fitted to the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn't light, the battery is fully charged.

3 Accessories

Designation
Various tripods
Telescopic staffs
Slope adapter
Car charging connector
Height transfer device

4 Technical data

Right of technical changes reserved.
PRE 3
Receiving range (diameter)
Accuracy
Laser class
Speed of rotation
Self-leveling range
Power source
Battery life
Operating temperature range
Storage temperature range (dry)
Protection class
Tripod thread
Weight (including battery)
Dimensions (L x W x H)
PRA 84 Li‑ion battery
Rated voltage (normal mode)
Maximum voltage (during operation or during charging
while in operation)
Rated current
Charging time
Operating temperature range
Storage temperature range (dry)
Charging temperature range (also for charging during
operation)
Weight
Dimensions (L x W x H)
Short designation
PUA 20, PA 921, PUA 30 and PA 931/2
PA 950/960, PA 951/961, PA 962 and PUA 50
PRA 78
PRA 86
PRA 81
With PRA 30 laser receiver: 2...400 m (6 to 1300 ft)
per 10 m (±0.5 mm) horizontal distance 0.5 mm
(0.02" in 32 ft,+75° F), temperature 24°C
Class 2, visible, 635 nm, < 1 mW (EN 60825-3:2007 /
IEC 60825 - 3:2007); class II (CFR 21 § 1040 (FDA))
300/min ± 10%
10°(±5°)
7.2V/ 4.5 Ah Li‑ion battery
Temperature +20°C (+68°F), Li‑ion battery: ≥ 40 h
-20...+50°C (-4°F to 122°F)
-25...+60°C (-13°F to 140°F)
IP 56 (in accordance with IEC 60529) (not in "charging
during operation" mode)
⁵⁄₈" X 18
2.4 kg (5.3 lbs)
252 mm X 252 mm X 201 mm (10" x 10" x 8")
7.2 V
13 V
120 mAh
2 h / +32°C / Battery is 80% charged
-20...+50°C (-4°F to 122°F)
-25...+60°C (-13°F to 140°F)
+0...+40°C (32° to +104°F)
0.3 kg (0.67 lbs)
160 mm X 45 mm X 36 mm (6.3" x 1.8" x 1.4")
en
15