Accessories; Technical Data; Safety Rules; Basic Information Concerning Safety - Hilti PR 28 Mode D'emploi

3. Accessories

Laser receiver
PA 360 laser receiver holder
PRA 811 battery holder
Tripod
en
Tripod
Tripod
Tripod
Leveling staff
Leveling staff

4. Technical data

NOTE
Right of technical changes reserved.
Receiving range (diameter)
Accuracy
Laser class: class 3R
Laser class: class IIIa
Speed of rotation
Self-leveling range
Power supply
Battery life
Operating temperature range
Storage temperature range
Protection class
Tripod thread
Weight (including 4 batteries)
Dimensions (L x W x H)

5. Safety rules

5.1 Basic information concerning safety

The tool is designed to be used for determining,
transferring or checking alignment in the horizontal
and inclined planes.
In addition to the information relevant to safety
given in each of the sections of these operating
instructions, the following points must be strictly
observed at all times.
16
Printed: 07.07.2013 | Doc-Nr: PUB / 5070177 / 000 / 00
PA 350
PA 360
PRA 811 (NiMH and size D cells)
PA 910
PA 911
PA 921
PA 931/32
PA 950/60
PA 951/61
With PA 350 laser receiver: 2 - 700 m (6 2300 ft)
Temperature 24°C (75.2°F), Horizontal distance
10 m (33 ft): 0.5 - 0.5 mm ( ")
As perIEC 825 1:2003
As perCFR 21 § 1040 (FDA)
300 r.p.m., 600 r.p.m., 900 r.p.m.
5 - 5°
NiMH battery or 4 size D alkaline cells
Temperature 20°C (+68°F), Alkaline manganese:
45 h
Temperature 20°C (+68°F), NiMH: Min. 30 h
20 - 50°C (-4 to 122°F)
30 - 60°C (-22 to 140°F)
As perIP 56 (in accordance withIEC 529)
" x 11
2.7 kg (6 lbs)
169 mm x 169 mm x 250 mm (6
5.2 Misuse
a) The tool and its ancillary equipment may present
hazards when used incorrectly by untrained per-
sonnel or when used not as directed.
b) To avoid the risk of injury, use only genuine Hilti
accessories and additional equipment.
c) Modification of the tool is not permissible.
" x 6 " x 9 ")