Accessories - Hilti PMP 32 Mode D'emploi

The PMP 32 is a self-leveling plumb laser which can be used by one per-
son working alone to plumb, very quickly and with great accuracy. The tool
incorporates 2 vertical laser beams.
Features:
Upward beam accuracy (± 3 mm at 10 m on a leveled surface).
●
Self leveling in all planes within ± 4°.
●
Short self-leveling time: ~ 3 seconds.
●
"Out of level" warning signal when the self-leveling range is exceeded
●
(the laser beams blink).
Rugged, impact-resistant plastic casing.
●
Compact and light – easy to use and carry with you.
●
Automatic cut-out: The tool switches itself off automatically after 15 min-
●
utes. Continuous operating mode may be selected if desired.
Easy to operate.
●
2.1 Items supplied with the point laser
(cardboard box version)
1 PMP 32 plumb laser
1 soft pouch
4 batteries
1 operating instructions
2 target plates

3. Accessories

Accessories:
Target plate (CM/IN)
Soft pouch
Laser visibility glasses*
* These are not protective glasses and thus do not protect the eyes from
Printed: 07.07.2013 | Doc-Nr: PUB / 5070095 / 000 / 00
PMA 52
PMA 61
PUA 60
en