Releasing The Lashing Strap; Cleaning And Care; Disposal - Powerfix Profi HG01477A-2 Instructions D'utilisation Et Consignes De Sécurité

Releasing the lashing strap

Q
CAUTION! Check before releasing the strap that the load is stable. Make sure that
the load is stable even without the lashing strap and that it cannot fall down.
CAUTION! RISK OF INJURY! Make sure that nobody is near the load when you
release the lashing strap. Falling parts could cause injuries.
CAUTION! RISK OF INJURY! When opening the lashing equipment, the preload
force is released at a stroke. That is why you should open the lashing strap with the utmost
caution.
Note: Before starting to unload, make sure that the lashing equipment is released so that
the load can be lifted freely.
HG01477A-1:
Open the ratchet handle
j
j Press the ratchet lock
(see Fig. B).
j Pull the webbing
j Release the S hook and thus the lashing strap from the load.
HG01477A-2:
j Press the clamp
Pull the webbing
j

Cleaning and care

Q
Note: Regular care will maintain the quality and functionality of the lashing strap.
j Clean the lashing strap with lukewarm water and pH-neutral cleaning agents. Avoid
corrosive detergents.
The ratchet tensioner should be regularly cleaned and then lightly greased. When greasing
j
it, make sure that parts that come into contact with the webbing are not greased.
j Store the lashing strap in a dry, well-ventilated cool place.
Avoid contact with chemicals, acids and alkalis as they may damage the lashing strap.
j

Disposal

Q
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-
out product.
12 GB/IE/NI
into the maximum position (see Fig. A III).
1
and open the ratchet handle
2
completely out of the slotted shaft
4
5 down (see Fig. C).
out of the clamping lock completely.
6
until the end stop
1
.
3