First Use; Items Supplied And Transport Inspection; Disposal Of The Packaging; Battery Insertion/Exchange - Powerfix Profi PLPRS A2 Mode D'emploi

First use

DANGER
During the commissioning of the appliance
personal injury and property damage
could occur!
► Packaging material should not be used as
a play thing . There is a risk of suffocation .
Items supplied and transport
inspection
This Laminate/Parquet Repair Set is supplied with
the following components as standard:
▯ Wax melter
▯ Cleaning scraper
▯ Scraper with planer function
▯ Scraper with curvature
▯ 11 x Hard wax sticks
▯ Sanding sponge
▯ Cleaning cloth
▯ 2 x Batteries 1 .5 V Type AA/LR6/Mignon
▯ Storage case
▯ This operating manual
NOTICE
► Check the contents to ensure that everything
is available and for signs of visible damage .
► If the contents are not complete, or are dama-
ged due to defective packaging or through
transportation, contact the Service Hotline
(see chapter Service) .

Disposal of the packaging

components for disposal if necessary . The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites .

Battery insertion/exchange

This wax melter requires 2 x 1 .5 V batteries,
type AA/LR6/Mignon, for operation .
♦ Open the battery compartment
underside of the wax melter
♦ Place the batteries into the battery compartment
, following the polarity details as depicted in
it (see fig . 1) .
♦ Close and secure the battery compartment .
■ 20 │ GB │ IE
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
on the
.
PLPRS A2