User Settings; Backlight Setting - Jaga Helios electric Manuel D'installation Et D'utilisation

13. USER SETTINGS
13.1. ACCESS TO THE USER SETTINGS
Press for 5 seconds to enter into the programming mode. The cursor moves to 'setting day and
time'. Press twice to move to 'user settings'. Press
5 sec
Setting day
13.2. SETTING SEQUENCE
All settings are consecutive. To exit the user settings, press
1 2

1. Backlight setting

2. Eco mode temperature lowering-level
3. Frost protection temperature
4. Comfort setpoint temperature limit
13.2.1. Backlight setting
Three modes can be set.
13.2.2. Eco mode temperature lowering-level
The drop in temperature is set at -3.5°C compared to the set temperature of the Comfort mode. You
13.2.3. Frost Protection temperature
82
1
and time
3
1. Press or
– L1: Temporary backlighting - backlight of the display when a
button is pressed.
– L2: Non-stop backlighting - backlight of the display all the time
– L3: the device will work according to the L1 mode.
2. Press to save and move to the next setting.
can adjust the lowered level from -1°C to -8°C, by intervals of 0.5°C.
Important: whatever the lowering level set, the Eco setting temperature
will never exceed 19°C.
3. Press or
4. Press to save and move to the next setting.
Your device is preset at 7°C. You can adjust the Frost Protection tempera-
ture from 5°C to 15°C, by intevals of 0.5°C.
5. Press or
6. Press to save and move to the next setting.
.
1
Program
settings
twice.
4 5
5. Maximal Boost duration
6. Maximum ambient temperature
7. Temperature unit
8. Restoring factory settings
to choose the setting you require.
to obtain the temperature level you require.
to obtain the temperature you require.
User
settings
6 7
(default setting)
8