Restoring Factory Settings; Installer Settings; Open Window Detection - Jaga Helios electric Manuel D'installation Et D'utilisation

13.2.8. Restoring factory settings
In order to a coming back to factory settings, proceed from the setting of the temperature unit,
press .
1. 'Rest' appears on the display, press
2. 'NO' appears. Press
- YES: factory settings reset
- NO: factory settings not reset
3. Press for 5 seconds. The device returns to its initial configuration and goes back automati-
cally to the home display of the user settings.
Press to exit the User settings.
14. INSTALLER SETTINGS
14.1. ACCESS TO THE INSTALLER SETTINGS
Press for 5 seconds to enter into the programming mode. The cursor moves to 'setting day and
time'. Press twice to move to 'User settings'. Press
tings'. Press .
1
Setting day
and time
5 sec
14.2. SETTING SEQUENCE
All settings are consecutive. To exit the user settings, press
1 2
14.2.1. Open window detection
The automatic mode enabled is the default setting.
1. Press or to select 'ON' or 'OFF'.
- ON: automatic mode enabled
- OFF: automatic mode disabled
2. To save and move automatically to the next setting, press
84
.
or to select 'YES'.
1
Program
settings

1. Open window detection

3 2. PIN code lock

3. Restoring factory settings

for 10 seconds to move to 'Installer set-
User
settings
3 times.
.
5 sec
Installer
settings
10 sec