Settings; Adjusting The Water Temperature - Jaga MINI FREESTANDING HYBRID Manuel D'installation Et D'utilisation

6. SETTINGS
6.1. ADJUSTING THE WATER TEMPERATURE
6.1.1. Adjusting the maximum water tempe-
rature for cooling
By reducing the water temperature setting, the
unit will start later. If the water temperature is
set higher, the unit will start sooner.
1. Put the device in the cooling mode
2. Hold down the [Mode] and [+] simultaneously
until the last 4 LEDs start flashing.
3. Short press the [-] or [+] button to adjust the set temperature.
4. The device returns to the selected mode. (±30sec).
32
12 ̊ C
14 ̊ C
16 ̊ C
18 ̊ C
20 ̊ C
22 ̊ C
24 ̊ C
26 ̊ C
JAGA N.V. | MINI FREESTANDING HYBRID | MANUEL | 2021.03.25 | V.01
6.1.2. Adjusting the minimum water tempe-
rature for heating
By increasing the water temperature setting,
the unit will start later. If the water temperature
is set lower, the unit will start sooner.
In combination with a heat pump, it may be
necessary to reduce the water temperature.
1. Put the device in heating mode
2. Hold down the [Mode] and [+] simultaneously
until the last 4 LEDs start flashing.
MODE
15 sec
24 ̊ C
MODE MODE
26 ̊ C
MODE MODE
28 ̊ C
MODE MODE
30 ̊ C
MODE MODE
32 ̊ C
MODE
MODE
34 ̊ C
MODE MODE
36 ̊ C
MODE MODE
38 ̊ C
MODE MODE
/ factory default water temperature