Token Issuing Procedure - CAME PS4000-HW Manuel D'installation

Token issuing procedure

- Stop the car atop the metal mass detection coil.
- Press the red button on the PSE4000 entrance unit.
- Retrieve the token from the tray.
The token must be stored carefully for it work when exiting at one of the parking facility's cash registers.
Corrugated ø 25 mm fl exible tube
for signal cables (type U/UTP Cat 5 AWG 24)
Corrugated ø 35 mm fl exible tube
for power cables
Coil controller
Minimum suggested section
for the cement base of the devices
600
150
Coil controller
EXIT
Safety coil
PS TOKEN - Hardware and wiring
EXAMPLE OF ENTRANCE AND EXIT CONFIGURATION
GARD
BAR
PSU EXIT
UNIT
PSE
ENTRANCE
UNIT
GARD
BAR
3000
Safety coil
ENTRANCE
1800
Parked vehicle detection coil
Entrance coil controller
35
500 min