Psi16 Auxiliary Cash Register Control - Description - CAME PS4000-HW Manuel D'installation

PSI16 Auxiliary cash register control – description
1
2* 3
1 - Power surge protection fuse
2 - Terminals for powering the 230 V a.c. * circuit board???
3 - Circuit protection fuse (Control Board)
4 - Terminals for connecting PS13 units
The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must
not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply.
Have in place a suitable dual pole cut-off switch with minimum contact openings of 3 mm, and section the power
PS TOKEN - Hardware and wiring
4
5 - Power on" warning LED light
6 - RS232 connector for connecting up RBMP1 card
7 - RS232 connector for connecting up MODEM
supply;
6 7
13
5