Brief Description Of The Important Features Of The Unit - Klauke mini+ Mode D'emploi

Instruction Manual
EK 50/5-L
Table 3 (see pic.1)
Pos. Description
1 Crimping head
2 Retract slide
3 LED (red)
4 battery lock
5 Battery
6 LED (white)
7 Trigger
8 Dies
9 Latch

3.2 Brief description of the important features of the unit

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the
maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp.
The unit is equipped with a special brake which stops the forward motion of the piston/dies when the trigger is re-
leased.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight
corners and other diffi cult working areas.
The tool is equipped with a microprocessor which shuts off the motor automatically after the crimp is completed,
indicates service intervals and low battery charges and performs internal checks sending out acoustical and optical
warning signals in case of a detected fault.
HE.13435_B © 02/2010
Function
Working unit to accommodate the dies
Bar to open the dies in case of an error or emergency
Indicator for Battery charge, Service Intervals and faults
Slide to unlock the battery
rechargeable Li-Ion battery 18V
to illuminate the working area
Actuator to start the crimping cycle
interchangeable dies with multiple crimping geometries
Mechanism to open/close the crimping head
3
GB