7.2
Charging Mode 3
T
T
WARNING
Risk of injury from using unsuitable aids
Use of adaptor plugs, extensions or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adaptor plugs, extensions or additional
charging cables to charge the vehicle.
Fig. 14: Charging Mode 3
9
The authorisation process is complete.
f Observe the instructions on the plain text display.
f Ensure that the vehicle and the charging cable are suit-
able for mode 3 charging.
f Connect the charging cable to the vehicle.
f Fully plug in the charging plug into the type 2 charging
socket of the device.
The charging plug is automatically locked and the
9
charging process is started.
14
Terminating the charging process
T
T
AATTENTION
Damage to the charging cable
Tensile stress of the charging cable may cause cable
breaks and other damage.
f Remove the charging cable only by pulling the plug
from the charging socket.
f End the charging process on the vehicle or with the
RFID card.
f Remove the charging cable from the charging socket.
f Remove the charging cable from the vehicle.
Charging cable cannot be removed
If the charging cable cannot be removed, e.g. after a power
failure, the charging plug could not be unlocked in the
device. The charging plug cannot be removed and must be
unlocked manually.
Î "9.3 Unlocking the charging plug"
7.3
Charging mode 1 (only Premium* S 22)
T
T
WARNING
Risk of injury by unsuitable aids
Use of adapter plugs, extensions or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adapter plugs, extensions or additional char-
ging cables to charge the vehicle.