Using The "Options" Menu; Adjusting The Image Position; Adjusting The Overscan; Adjusting The Vertical Size Of The Display (Subtitle Setting) - Sharp XV-Z3000U Mode D'emploi

Using the "Options" Menu

Options 1
1
Image Shift
2
Overscan H
2
Overscan V
3
Subtitle
4
OSD Display
5
Video System
6 Signal Type
7 HDMI Setting
8 Background
9 Auto Power Off
Lamp Timer(Life)
0
Settings on the Options 1 menu
1 Adjusting the Image
1 1
1 1
Position
You can move the projected image vertically.
O button
Note
• The Image Shift function cannot be selected
when "Resize" is set to "DOT BY DOT".
• You can also use the IMAGE SHIFT buttons
on the remote control to adjust the image po-
sition.
INPUT 1
0
0
0
0
On
Auto
Auto
Standard
Blue
On
0 h 100%
Q button
Menu operation n Page 41

2 Adjusting the Overscan

2 2
2 2
This function allows you to adjust the Overscan
area ratio (display area ratio).
O button
Orientation
Overscan H Reduces the
(Horizontal) image.
(The display
Overscan V area ratio
(Vertical) becomes larger.)
Note
• This function can only be adjusted when a
video, S-video, or Component signal is input.
• If the display area ratio is set too large, noise
may appear at the screen edges. If this hap-
pens, set the display area ratio to a smaller value.
• When "Resize" is set to "CINEMA ZOOM",
depending on the input signal, "Overscan V"
may not be adjustable.
• Also read "About Copyrights" on page 37.
3 Adjusting the Vertical Size of
3 3
3 3
the Display (Subtitle Setting)
With this function, you can adjust the vertical size
of the display to allow for subtitles.
O button
The image is compressed by adjusting
the vertical size of the display.
Q button
The image is enlarged by adjusting the
vertical size of the display.
Note
• When changing the screen with the Subtitle set-
ting, not only the bottom of the screen rises, but
also the upper part is changed to a certain point.
• The Subtitle setting can be adjusted more ef-
fectively with the Overscan and Image Shift
functions.
• The Subtitle setting only works when "Resize"
is set to "CINEMA ZOOM".
• The adjustment area changes according to the
input signal.
Q button
Enlarges the
image.
(The display area
ratio becomes
smaller.)
47