Sharp XV-Z3000U Mode D'emploi page 26

When connecting the component video equipment to the computer-RGB/
component input terminal on the projector (INPUT5)
To component output
(Y, C /P , C /P ) terminal
B B R R
When connecting to equipment with HDMI output teminal (INPUT6)
HDMI is a new specialized interface capable of delivering a video and audio signal to
the terminal using just one cable. Since this projector does not support an audio signal
by itself, use an amplifier or other audio device.
For video connection, use a cable that conforms to HDMI standards. Using cables that
do not conform to HDMI standards may result in a malfunction.
To HDMI output terminal
Note
• HDMI (High Definition Multimedia Interface) is a digital AV interface that can deliver a high-defini-
tion video signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the
digital video signal does not degrade when transmitted, and a high-quality image with a simple
connection can be enjoyed.
• When a DVI to HDMI conversion cable is connected to the HDMI terminal, a proper picture may not
be displayable.
DVD, etc.
3 RCA to 15-pin D-sub cable
(optional accessory: AN-C3CP2)
HDMI compatible device
HDMI cable (type A)
(commercially available)
To INPUT5 terminal
To INPUT6 terminal
25