Quick Start - Sharp XV-Z3000U Mode D'emploi

Quick Start

This section shows the basic operation (projector connecting with the video equipment).
For details, see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the video equipment is explained using one ex-
ample.
1. Place the projector facing a wall or a screen
2. Connect the projector to the video equipment and plug the power
cord into the AC socket of the projector
AC socket
3. Remove the lens cap and turn the projector on
16
3
STANDBY/ON
8
button
5
INPUT buttons
6 Focus ring
6 Zoom ring
HEIGHT
6
ADJUST lever
On the On the remote
projector
To INPUT 4 terminal
Connect the audio output of
any video devices to an
appropriate audio device.
control
STANDBY button
8
3 ON button
5 INPUT 4 button
7
KEYSTONE button
Adjustment buttons
7
(P/R/O/Q)
7 ENTER button
_P. 18
_PP. 22–28
_P. 28