Adjusting The Projected Image; Adjusting The Focus; Adjusting The Screen Size; Adjusting The Height - Sharp XV-Z3000U Mode D'emploi

Image Projection (Continued)

Adjusting the Projected Image

1 Adjusting the Focus

You can adjust the focus with the focus
ring on the projector.
Rotate the focus ring to adjust the fo-
cus while watching the projected image.

2 Adjusting the Screen Size

You can adjust the screen size using
the zoom ring on the projector.
Rotate the zoom ring to enlarge or
shrink the screen size.

3 Adjusting the Height

The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.
1
Lift the projector to adjust its
height while lifting the HEIGHT
ADJUST lever.
2
Remove your hands from the
HEIGHT ADJUST lever of the pro-
jector after its height has been
finely adjusted.
• The angle of projection is adjustable up
to 8 degrees from the surface on which
the projector is placed.
30
Zoom ring
Focus ring
HEIGHT
ADJUST lever
Make small
adjustments.