Sharp XV-Z3000U Mode D'emploi page 38

Computer
Input Signal
Computer
Resolution lower than
XGA
XGA
(1024K768)
1280K720
: Cutout area on which images cannot be projected.
Note
• You can select "CINEMA ZOOM" when with a "VGA/SVGA" signal with a vertical frequency 60 Hz
and less. However, when a "VGA/SVGA" signal with a vertical frequency of more than 60 Hz is used,
"CINEMA ZOOM" is not available.
About Copyrights
• When using the RESIZE function to select an image size with a different aspect ratio
to a TV program or video image, the image will look different from its original appear-
ance. Keep this in mind while choosing an image size.
• The use of the Resize, Keystone Correction, Subtitle, or Overscan function to com-
press or stretch the image for commercial purposes/public displays in a café, hotel,
etc. may be an infringement of copyright protected by law for copyright holders. Please
use caution.
• While watching non-widescreen images (4:3), if you use the RESIZE function to fill
the screen or use the Overscan function to change the aspect ratio of a fixed-ratio
input signal, parts of the outer edge of the image will be cut off or distorted. To watch
original images as the producers intended, set RESIZE to "SIDE BAR" and Overscan
to its default setting.
Image
STRETCH
type
4:3 aspect
ratio
4:3 aspect
ratio
16:9 aspect
ratio
Output screen image
CINEMA
SIDE BAR
ZOOM
DOT BY DOT
37