Automatic Data Output; Continuous Data Output - KERN and SOHN TFKB 6K-5-A Mode D'emploi

14.4.3 Automatic data output < auto >
Data output happens automatically without having to press the PRINT-key as soon as
the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:

In Setup menu invoke the menu setting < Print PrMode > and
confirm with button .

For an automatic data output select the menu setting < auto > with the
navigation keys and confirm with the  button.

Use the navigation keys  to select the setting < on > and confirm with  button.
< zRange > is displayed.

Confirm with  button and set the required output condition with the navigation
keys .

Confirm with  button.

To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance:

If required, place empty container on scale and tare.

Place weighed goods and wait until the stability display (
The weighing value is issued automatically.
14.4.4 Continuous data output < cont >
Enable function and set the output interval:

In Setup menu invoke the menu setting < Print PrMode > and confirm
with  button.

For a continuous data output select the menu setting < cont > with the
navigation keys and confirm with the  button.

Use the navigation keys  to select the setting < on > and confirm with  button.

<spedd> is displayed.

Acknowledge with the  button and set the required time interval with the
navigation keys  (numeric input see chap. 3.2.2)

To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance.

If required, place empty container on scale and tare.

Place goods to be weighed on balance.

The weighing values are issued according to the defined interval.
FKB-BA-e-2111
) appears.
39