Application; Application-Specific Settings; Overview; Using The Application - KERN and SOHN TFKB 6K-5-A Mode D'emploi

12 Application <Check weighing>
Shouldn't the application <Check weighing> already be enabled, select the
menu setting < mode  check >, see chap. 9

12.1 Application-specific settings

+ Navigation in menu see chap. 13.1

12.1.1 Overview


Press the TARE button and keep it pressed until the first menu item < limits
> will be displayed
Level 1 Level 2
limitS
limlow
limupp
Ptare
actuel
PRE-TARE
manuel
CLEAR

12.2 Using the application

With the application <Check weighing> you can set an upper or lower limit value and
thus ensure that the weighed load remains exactly within the set tolerance limits.
When limit values are exceeded below or above, an optical and acoustic signal will be
displayed (if enabled in menu)
Optical signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target quantity within defined tolerance
Target quantity below defined tolerance
28
Level 3
Lower limit value, numeric input see chap. 3.2.2
Upper limit value, numeric input see chap. 3.2.2
Take over the placed weight as PRE-TARE value, see
chap. 10.1.2.1
Numeric input of the tare weight, see chap. 10.1.2.2.
Delete PRE-TARE value
Description / Chapter
FKB-BA-e-2111