Using The Application; Parts Counting - KERN and SOHN TFKB 6K-5-A Mode D'emploi

11.2 Using the application

11.2.1 Parts counting

Before the balance can count parts, it must know the average piece weight
(i.e. reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-called
reference quantity. Counting is then carried out on the basis of the calculated average
piece weight.
• The higher the reference quantity the higher the counting exactness.
• Especially high reference must be selected for small parts or parts with
considerably different sizes.
• Smallest counting weight see table „Technical data"
Procedure:
1. Calculate reference
Reference piece quantity 5, 10, 20 or 50:

If necessary, put on and tare the weighing container.

Put on the desired quantity of reference pieces.

Press the TARE button and keep it pressed until the first menu item < ref > will be
displayed

Confirm with  button.

Use the navigation keys  to select the reference piece quantity (5, 10, 20, 50)
according to the placed reference and confirm with the  button.

The balance will calculate the average item weight and then displays the quantity of
pieces.

Remove reference weight. The balance is now in parts counting mode counting all
units on the weighing pan.
Reference piece quantity user-defined:

If necessary, put on and tare the weighing container.

Put on the desired quantity of reference pieces.

Press the TARE button and keep it pressed until the first menu item < ref > will be
displayed

Confirm with  button.

Use the navigation keys  to select the reference piece quantity < free > and
confirm with  button.

The numeric input window appears.

Enter and confirm the quantity of the placed reference parts, numeric input see
chap. 3.2.2
26 FKB-BA-e-2111