KERN and SOHN TFKB 6K-5-A Mode D'emploi page 78

ztrack
Maintaining zero
reset
34
on
Automatic maintaining zero [< 3 d]
If the amount of the weighed material is reduced or
increased significantly, the scale's "stabilizing and
compensating" mechanism can result in displaying
erroneous weighing results! (e.g.: slow outflow of the
off
liquid from the container placed on the scale,
evaporating processes).
When dosing with small weight fluctuations, it is
recommended to switch this function off.
Reset balance settings to factory settings
FKB-BA-e-2111