Rs 232/Rs 485 Communication Description; Communication Format - Agilent Technologies Turbo-V 81-AG Notice De Mode D'emploi

17 Technical Information

RS 232/RS 485 Communication Description

RS 232/RS 485 Communication Description
Both the RS 232 and the RS 485 interfaces are available on connector
J2. The communication protocol is the same (see the structure below)
but only the RS 485 manages the address field. Therefore, to enable
the RS 485, it is necessary to select the type of communication as well
as the device address by means of the T-Plus.

Communication Format





172/192
8 data bit
no parity
1 stop bit
baud rate: 600/1200/2400/4800/9600 programmable
Turbo-V 81-AG Navigator Controller User Manual / 87-901-004-01 (G)