Input Power Connection On The Model 969-8972; Rs 232/Rs 485 Communication Description; Communication Format - Agilent Technologies TV 301SF Notice De Mode D'emploi

Input Power Connection on the Model 969-8972

The following figure shows the input power connection relevant to
the model n. 969-8972.
Figure 23

RS 232/RS 485 Communication Description

Both the RS 232 and the RS 485 interfaces are available on the
connector J6.
The communication protocol is the same (see the structure below),
but only the RS 485 manages the address field. Therefore to enable
the RS 485 is necessary to select the type of communication as well
as the device address by means of the Navigator software.

Communication Format





TV 301SF Navigator User Manual /

Input Power Connection on the Model 969-8972

8 data bit
no parity
1 stop bit
baud rate: 600/1200/2400/4800/9600 programmable
87-900-957-01 (H)
Technical Information
261/300
17