Agilent Technologies Turbo-V 81-AG Notice De Mode D'emploi page 170

17 Technical Information
J1 – IN-OUT
How to connect the outputs of the controller
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected, e.g. a LED, a computer,
etc., and the related simplified circuit of the controller. The example
figure refers to the programmable set point signal on pins 11 and 9.
Figure 24
170/192
Typical output connection1
Turbo-V 81-AG Navigator Controller User Manual / 87-901-004-01 (G)