Publicité
16
Instructions for Use
Installation
Installation
Do not install or use the controller in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be complied
with:
WARNING!
For user safety, the Turbo-V controller 9698996 must be powered by a 3-wire
power cord (see orderable parts table) and plug (internationally approved).
Always use this power cord and insert the plug in a socket with a suitable
ground connection to avoid electrical shock and to comply with EC
requirements . The high voltage developed inside the controller can cause
severe injury or death. Before installing or servicing the unit, always
disconnect it from the socket.
WARNING!
To avoid injury to personnel and damage to the equipment, if the pump is
lying on a table, make sure it is steady. Never operate the Turbo-V pump if the
pump inlet is not connected to the system or blanked off.
136/192
temperature: from + 5 °C to +45 °C
relative humidity: 0 – 90 % (non-condensing)
Turbo-V 81-AG Navigator Controller User Manual / 87-901-004-01 (G)
Publicité
Chapitres
