Workplace; Important - Steba BM2 Mode D'emploi

Attention! Device gets hot. Danger of burns! Do
∙
not place the appliance on a sensitive surface (e.g. pain-
ted furniture) and keep a distance of at least 70cm to
burnable materials.
∙ During operation steam emerge. Keep hands and face away.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mould formation.
Cleaning
∙ Attention! Pull the plug before cleaning and allow
the device to cool down.
∙ Never immerse the unit into water.
∙ Clean all internal metal parts and the housing with a damp
cloth and soapy water. Let everything dry well.
∙ Clean the bread pan with a soft damp cloth. Do not use har-
sh or abrasive cleaners, chemical cleaners or solvents, abrasive
scouring pads or metal implements.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable and a heat resisting surface. It is
important that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
21