Condition:
The device is in DAB mode.
1.
Press the [SETUP] button.
The display shows the [DAB Preset List] text.
Fig. 45: DRC Setting
2.
Turn the click wheel until [DRC Setting] is shown
(Fig. 45).
3.
Press the click wheel or the [OK ]button on the
remote control to confirm the selection.
4.
Turn the click wheel to carry out the desired set-
ting.
5.
Press the click wheel to confirm the setting.
12
CD playback
L NOTICE!
Improper operation can result in material
damages!
Do not insert any recording media that deviate
from the standard CD format (e.g. mini-discs, etc.)
into the CD player. These may not be played and
ejected correctly. Insert only one disc at a time
into the CD player.
1.
Switch on the sonoroSTEREO 2.
2.
Insert the CD into the CD slot with the label side
up.
The CD player will automatically load the CD
and start playback.
i
If the device is in a different mode, it will
automatically switch to CD mode.
The display shows the following information in CD
mode:
104
Fig. 46: Display in CD mode
1
Playback sequence (Repeat, Shuffle, CD Resume)
2
CD mode
3
Time
4
Elapsed playback time in minutes
5
Track number
6
Playback status (Play/Pause)
To pause playback of the CD, press the
[Play/Pause] button.
To resume playback of the CD, press the
[Play/Pause] button.
To switch to the next track, press the [Next] button
once.
To fast forward through a track, press and hold
[Next].
To switch to the previous track, press the
[Previous] button.
To fast reverse through a track, press and hold
[Previous].
To stop CD playback, press [Stop].
To eject the CD, press [Eject]
Adjusting CD playback
You can choose different playback sequences to play
tracks on a CD.
1.
Press the [SETUP] button to open the CD menu.
This includes the following functions:
Repeat a single track
Repeat all tracks on the CD
Shuffle
CD Resume
Adjust bass
Adjust treble
Equalizer Effect
Settings
2.
Press the click wheel to select the function.
3.
Press the click wheel to confirm your selection.
Repeating a single track
The current track is played repeatedly. This function
is terminated when you switch modes or eject the
disc.