Cd Playback - Sonoro STEREO SO-310 Mode D'emploi

Masquer les pouces Voir aussi pour STEREO SO-310:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 107
Condition:
The device is in DAB mode.
1.
Press the [MENU] button.
ð The display shows the [DAB Preset List] text.
Fig. 40: DRC Setting
2.
Turn the click wheel until [DRC Setting] is shown
(Fig. 40).
3.
Press the click wheel or the [OK ]button on the
remote control to confirm the selection.
4.
Turn the click wheel to carry out the desired set-
ting.
5.
Press the click wheel to confirm the setting.
12

CD playback

L NOTICE!
Improper operation can result in material
damages!
Do not insert any recording media that deviate
from the standard CD format (e.g. mini-discs, etc.)
into the CD player. These may not be played and
ejected correctly. Insert only one disc at a time
into the CD player.
1.
Switch on the sonoroSTEREO.
2.
Insert the CD into the CD slot with the label side
up.
ð The CD player will automatically load the CD
and start playback.
i
If the device is in a different mode, it will
automatically switch to CD mode.
The display shows the following information in CD
mode:
96
Fig. 41: Display in CD mode
1
Playback sequence (Repeat, Shuffle, CD Resume)
2
CD mode
3
Time
4
Elapsed playback time in minutes
5
Track number
6
Playback status (Play/Pause)
n To pause playback of the CD, press the
[Play/Pause] button.
n To resume playback of the CD, press the
[Play/Pause] button.
n To switch to the next track, press the [Next] button
once.
n To fast forward through a track, press and hold
[Next].
n To switch to the previous track, press the
[Previous] button.
n To fast reverse through a track, press and hold
[Previous].
n To stop CD playback, press [Stop].
n To eject the CD, press [Eject]
Adjusting CD playback
You can choose different playback sequences to play
tracks on a CD.
1.
Press the [MENU] button to open the CD menu.
This includes the following functions:
n Repeat a single track
n Repeat all tracks on the CD
n Shuffle
n CD Resume
n Adjust bass
n Adjust treble
n Equalizer Effect
n Settings
2.
Press the click wheel to select the function.
3.
Press the click wheel to confirm your selection.
Repeating a single track
The current track is played repeatedly. This function
is terminated when you switch modes or eject the
disc

Publicité

Table des Matières
loading

Table des Matières