–
With the middle line [23a.2] of the sight
gauge lined up on the pencil line, plunge a
mortise slot into each piece of wood.
–
Join the two pieces of wood together with-
out glue, and examine the alignment of the
original pencil lines.
–
If the pencil lines are not aligned, loosen
the two screws [23a.1] on the sight gauge
and slide the gauge sideways as noted in
the upper image.
Accessories, Tools
For your own safety, use only
original Festool accessories and spare parts.
The accessory and tool order number can be
found in the Festool catalogue or on the In-
ternet under www.festool-usa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro-
vides protection and storage for the tool and
accessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
–
Place one systainer on top of the other.
–
Release all four latches on the lower sys-
tainer by pulling back at their top edges
[23.1].
–
Slide all four latches upward [23.2].
–
Snap all four latches back to their fl at po-
sition [23.3] so they engage the stacking
tabs of the upper systainer.
23.3
23.2
23.1
Warranty
Conditions of 1+2 Warranty
You are entitled to a free extended warranty
(1 year + 2 years = 3 years) for your Festool
power tool. Festool shall be responsible for
all shipping costs during the fi rst year of the
warranty. During the second and third year of
the warranty the customer is responsible for
shipping the tool to Festool. Festool will pay
for return shipping to the customer using UPS
Ground Service. All warranty service is valid
3 years from the date of purchase on your
receipt or invoice.
Festool Limited Warranty
This warranty is valid on the pre-condition that
the tool is used and operated in compliance
with the Festool operating instructions. Fes-
tool warrants, only to the original consumer
purchaser, that the specifi ed tool will be free
from defects in materials and workmanship
for a term of one year from the date of pro-
curement. Festool makes no other warranty,
express or implied, for Festool portable power
tools. No agent, representative, distributor,
dealer or employee of Festool has the au-
thority to increase or otherwise change the
obligations or limitations of this warranty. The
obligations of Festool in its sole discretion un-
der this warranty shall be limited to the repair
or replacement of any Festool portable power
tool that is found to be defective as packaged
with the User Manual.
Excluded from coverage under this warranty
are: normal wear and tear; damages caused
by misuse, abuse or neglect; damage caused
by anything other than defects in material and
workmanship. This warranty does not apply to
accessory items such as circular saw blades,
drill bits, router bits, jigsaw blades, sanding
belts, and grinding wheels. Also excluded
are "wearing parts", such as carbon brushes,
lamellas of air tools, rubber collars and seals,
sanding discs and pads, and batteries.
Festool portable power tools requiring replace-
ment or repair are to be returned with the
receipt of purchase to Festool (call 800-554-
8741 for address details).
IN NO EVENT SHALL FESTOOL BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDEN-
TAL DAMAGES FOR BREACH OF THIS OR
17