Program Buttons - Comelit 1454 Manuel D'utilisation

Program buttons

` Click to access the "SETTINGS" menu.
` Click to access Key programming.
The first time you access the address configuration, key programming and call configuration areas, you will
be asked to enter a password: the default password is 0000 (to set a new password, see page 33 for
instructions).
` Enter the password and click
` Click to display the configurations without the possibility of modifying them.
` Click /
` Select one of the options "Intercom", "Self-ignition", "Key", "I/O Actuator", "Function disa-
bled".
For these buttons, the software applies the default setting: "Function disabled".

Intercom:
Program VIP address
/ /
to access set/modify configurations.
/ / /
Tick this option to program intercom calls to an internal unit in the system.
VIP address: If this option is selected, you will then need to enter the ViP ad-
dress of the user you want to associate with the intercom call.
Bracket: If this option is selected, you will then have to choose whether you
want to call the Master monitor or a Slave monitor (for which the identification
number will be required) for your apartment.
/ /
to access Key programming.
37