Specified Conditions Of Use; Pole Hedge Trimmer; Residual Risks - PrimAster PMAMT 40 Manuel D'utilisation

GB ENGLISH

SPECIFIED CONDITIONS OF USE

Take a firm stance to maintain balance during operation
and be sure to use the included carrying strap.
Chain saw
• The chain saw is designed for cutting branches, trunks,
logs, and beams of a diameter of 12 cm determined by
the cutting length of the guide bar. It is only designed
to cut wood.
WARNING
When using the chain saw, the safety rules must
be followed. For your own safety and that of
bystanders, you must read and fully understand
these instructions before operating the chain saw.
You should attend a professionally organized safety
course in the use, preventative actions, first-aid,
and maintenance of chain saws. Please keep these
instructions safe for later use.
WARNING
Chain saws are potentially dangerous tools.
Accidents involving the use of chain saws often
result in loss of limbs or death. It is not just the
chain saw that is the hazard. Falling branches,
toppling trees, and rolling logs can all kill. Diseased
or rotting timber poses additional hazards. You
should assess your capability of completing the
task safely. If there is any doubt, leave it to a
professional tree surgeon.
Keep the pruner in good operating condition,
improper maintenance, the use of non-compliant
spare parts, or removal or modification of safety
devices can lead to serious damage to property or
personal injury.

Pole hedge trimmer

This hedge trimmer is only for cutting shrubs, Bushes,
ornamental plants and hedges determined. The The
maximum branch thickness to be cut must not be 19 mm
exceed. The use of the hedge trimmer is for determines
the private garden area. The user of the Hedge trimmer
has adequate protective equipment during use according
to the instruction manual and the one attached to the
machine To worry about warning pictograms. Before each
use or while the hedge trimmer is in use, this is for any
No changes may be made to the device. This can endanger security.
This device may only be used as intended. Not observing general regulations in force and instructions from
this manual does not make the manufacturer liable for damages.
Please note that our devices were not designed for commercial, craft or industrial use. We do not assume
any guarantee if the device is used in commercial, craft or industrial companies as well as for similar activities.
46
electrical or mechanical damage to consider.
If damage to the machine is found, the Stop work and
contact a specialist workshop.
WARNING
Risk of injury
The hedge trimmer may not be used to cut grass, hard
brushes and wood or to crush material for composting
purposes.

Residual risks

Even if the tool is used correctly there always remains a
certain residual risk, which is not excluded can be. From
the type and construction the tool may have the following
potential hazards be derived:
• Contact with the unprotected shaving blade (cuts)
• Reaching into the running hedge trimmer (cut injury)
• Unexpected, sudden movement of the Material to be cut
• Throwing away faulty shear teeth
• Throwing away parts of the material to be cut
• Damage to the hearing if not prescribed Hearing
protection is worn
• Inhalation of clippings
Brush cutter / Grass trimmer
Use this trimmer for its provided purpose only, i.e. for the
cutting of grass, brushwood and weed
• the 3-point blade is suitable for cutting brushwood and
small shrubs
• the cutting line head can eliminate tall grass and
non-woody vegetation near fences, walls, foundations,
pavements, around trees, etc. or to completely clean a
particular area of the garden.
WARNING
Risk of injury
The appliance must not be used to cut hedges, hard
branches and wood or to crush material for compost.
Do not use the appliance to cut grass that is not on the
ground, e.g. grass growing on walls, rocks, etc
Please note that permissible uses for the tool could be
limited by national regulations. It is necessary to comply
with the regulations applicable in the country where the
truck is used.
NOTE
Avoid using the engine at full power for the first 6-8
working hours.