Ipod; Playing Back An Ipod - Sony MEX-BT4000P Mode D'emploi

M:\081\XPML A7.0\ML\New Folder\4296017111_MEX-BT4000P_CaFR\01US-
MEXBT4000PU\01US02CD-U.fm
00ML+00COV-U.book Page 14 Friday, August 26, 2011 1:30 PM

iPod

In these Operating Instructions, "iPod" is
used as a general reference for the iPod
functions on the iPod and iPhone, unless
otherwise specified by the text or
illustrations.
For details on the compatibility of your
iPod, see "About iPod" (page 38) or visit the
support site on the back cover.

Playing back an iPod

1
Open the USB cover, then connect the
iPod to the USB connector with a USB
connection cable for iPod (not
supplied)*.
* RC-100IP USB connection cable for iPod is
recommended.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press 
repeatedly until "USB" appears. ("IPD"
appears in the display when iPod is
recognized.)
Press and hold  for 1
second to stop playback.
To remove the iPod, stop iPod playback,
then remove the iPod.
14
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by the iPhone itself. In order
to avoid sudden loud sound after a call, do not
increase the volume on the unit during a
telephone call.
Note
Do not detach the front panel during playback of
the iPod, otherwise data may be damaged.
Tip
The iPod is recharged while the unit is turned on.
Resuming mode
When the iPod is connected to the dock
connector, playback starts in the mode set
by the iPod. In this mode, the following
buttons do not function.
–  (REP)
–  (SHUF)
Changing display items
Press .
Note
Some letters stored in iPod may not be displayed
correctly.
Skipping albums, podcasts,
genres, playlists and artists
To Do this
Press / (ALBUM /
Skip
) [press once for each
skip]
Press and hold /
Skip
(ALBUM /)
continuously
[hold to desired point]
masterpage:Left
MEX-BT4000P
4-296-017-11(1)