Error Displays/Messages - Sony MEX-BT4000P Mode D'emploi

M:\081\XPML A7.0\ML\New Folder\4296017111_MEX-BT4000P_CaFR\01US-
MEXBT4000PU\01US02CD-U.fm
00ML+00COV-U.book Page 44 Friday, August 26, 2011 1:30 PM
 The playback sound stops momentarily when
the connection between this unit and the
cellular phone is being made. This is not a
malfunction.
The connected Bluetooth audio device
cannot be controlled.
 Check that the connected Bluetooth audio
device supports AVRCP.
Some functions do not work.
 Check if the connecting device supports the
functions in question.
The name of the other party does not appear
when a call is received.
 The calling phone is not set to send the phone
number.
A call is answered unintentionally.
 The connecting phone is set to answer a call
automatically.
 "AUTO ANSWER" of this unit is set to "ANS-
1" or "ANS-2" (page 21).
Pairing failed due to time out.
 Depending on the connecting device, the time
limit for pairing may be short.
– Try completing the pairing within the time.
Bluetooth function cannot operate.
 Turn off the unit by pressing 
for more than 2 seconds, then turn the unit on
again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular phone,
set the cellular phone to output the sound from
the car speakers.
The phonebook data stored in this unit does
not appear.
 The other Bluetooth device is connected to this
unit via the Bluetooth function.
– Connect a cellular phone whose phonebook
data has been transferred to this unit
(page 25).
Pandora® connection is not possible.
 Shut down the Pandora® application on the
mobile device, and then launch again.
44

Error displays/Messages

BT BUSY
 The phonebook and the call history of the
cellular phone are not accessible from this unit.
– Wait for a while, and then try again.
CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
DEVICE FULL
 There are 5 devices already stored in the
internal phonebook.
– Delete one of them, then try to add the other
cellular phone's data (page 27).
EMPTY
 The call history is empty.
 The phonebook is empty.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Reconnect it again.
 Press  to remove the disc.
 BT Initialize failed.
 Phonebook access failed.
 Phonebook content was changed while
accessing the cellular phone.
– Access the phonebook in the cellular phone
again.
P (preset number) EMPTY
 The preset dial is empty.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
masterpage:Left
MEX-BT4000P
4-296-017-11(1)