Product Description; Installation; Installation Steps - Fig. 4 To - SOMFY Dexxo Compact RTS Manuel D'installation

DEXXO COMPACT RTS

2 - PRODUCT DESCRIPTION

2.1 Composition - Fig. 1
No. Qty Description
Connecting arm
Shaft
Circlips
Single unit rail
Sleeve
Chain bearings
2.2 Field of application - Fig. 2
This drive is exclusively intended to equip a garage door designed for indoor
residential use not exposed to inclement weather.
Types of door (Fig.2)
The DEXXO
A
B
-
Door dimensions (Fig. 2)
-
-
relation to the lintel (Fig. 4-
- By cutting the connecting arm.

3 - INSTALLATION

manual release of the product.
3.1 Installation height - Fig. 3
-
-

3.2 installation steps - Fig. 4 to 14

Mounting the lintel yoke and door yoke (Fig. 4)
mm max in relation to the lintel. (Fig. 4-
©
Copyright 2015 SOMFY ACTIVITES SA. All rights reserved.
(Fig. 6- ).
)
).
Assembling the 2-part rail (Fig. 5)
[1]. [2]. [3].
[4].
[5].
[6]. Tighten the nut to tension the chain or belt. The compressed rubber must
screws.
Assembling the rail to the motor head (Fig. 6)
Mounting the assembly on the garage ceiling (Fig. 7 to 9)
Mounting the lintel yoke (Fig. 7)
Mounting to the ceiling
(Fig. 9 - ).
Mounting the arm to the door and carriage (Fig. 10)
[1].
[2]. Bring the carriage level with the door.
[3].
Adjusting and mounting the opening stop (Fig. 11)
[1].
door to the open position.
[2].
Mounting the chain bearings (Fig. 12)
past the outside of the rail.
Checking the tension of the chain or belt (Fig. 13)
tension.
Connection to the electrical power supply (Fig. 14)
Connect to the mains supply.
for auto-programming.
EN
(Fig. 8).
(Fig. 9)
4