Service Menu - Vestfrost VTS 258 Mode D'emploi

GB

Service menu:

From the main view push the SERVICE key and the SERVICE menu is entered.
See below picture:
PROBES: Enter the probes, to see the measured temperatures. 1-4 probes is availa
ble depending on model.
PARAMETERS: Enter the setting of the parameters. Please note that changes made to the
parameters should only be made of a technician.
SELF TEST: Enter the Self Test program of the controller.
CLOCK: Enter clock menu, where it is possible to change date and time.
PASSWORD: Enter the password menu, where it is possible to change the password.
LANGUAGE: Enter the language menu, where it is possible to change language.
How to set time and date:
1. Enter the SERVICE menu
2. Select CLOCK sub-menu
3. Push the ENTER key.
4. Set the day by means of the UP and DOWN keys.
5. Push the SET key, to confirm and pass to the setting of time.
6. Use the same procedure as for the date.
7. Then confirm the selection by means of the SET key.
16