Fault Finding - Vestfrost VTS 258 Mode D'emploi

Fault finding

Fault
Screen of keybord is
not lit.
Temperature in
freezer is too high.
Temperature in
freezer is too low.
Vibration or bother-
some noise.
Compressor runs
continuously.
Display or alarm log
shows "Real Time
Clock Error".
Possible cause
Power failure; the fuse is blown;
the appliance is not plugged in
correctly, the power is cut.
The ventilation grille is blocked.
The door is not closed properly.
The quantity of items placed in
the freezer at a time is greater
than the capacity of the appli-
ance.
Thick layer of frost and ice.
The temperature setting is too
high.
The temperature setting is too
low.
The appliance is not level.
The temperature setting is too
low.
Too high room temperature.
The date and time is not set.
Remedy
Check that power is connected.
Reset the fuse.
Ensure unhindered air circulation.
Close the door and wait a few
hours.
Wait a few hours.
Defrost the freezer.
Lower the temperature setting.
Raise the temperature setting.
Level the appliance (For model
with adjustable feet: use a spirit
level)
Raise the temperature setting.
Ensure adequate ventilation.
Please set the date and time
See page 16.
27
GB