Alarm Menu - Vestfrost VTS 258 Mode D'emploi

GB
IMPORTANT: during the download don't remove the USB pen drive: this action could
damage the data files and USB pen drive itself.
WARNING: leave the USB pen inserted only for the time necessary to export data then
remove.
WARNING: if a not compatible USB pen drive is used it can cause a reset of the con-
troller
How to enter the Graph:
1. Enter the DATA menu
2. Select GRAPH sub-menu
3. Push the ENTER key and the GRAPH menu is entered.
4. By UP and DOWN keys chose the probe that has to be displayed.
5. Push the HOME key to get back to the main view.
NOTE: A graph is erased when the controller is switched off.

Alarm menu:

If the alarm icon is flashing on the main display, an alarm is occurring.
If the alarm icon is displayed but not flashing on the main display, an alarm is occurred and
recovered.
Once the alarm signal is detected the buzzer can be silenced by pressing any key.
19