Vestfrost VTS 258 Mode D'emploi page 18

GB
Logged data will have this layout:
Where TR3, EVP, TL1, TL2 = Value of probes.
With probe failure or absence:" - " symbol is displayed. Please note that 1-4 probes are avail-
able depending on model.
ST: status of the controller/load
● - = operating, without any load activated;
● D = defrost running (if automatic defrost is available)
● C = compressor working
How to export data:
Enter the EXPORT menu
1.
Insert the USB pen drive supplied by Vestfrost.
2.
Select ALARM or DATA, the controller starts sending data to the pen drive, when
3.
the export is finished the message: EXPORT - Copy completed is displayed.
The exported data will be exported as a CSV-file (Comma Separated Values). This file can be
used in ex. Excel for making graphs.
18