Chart Recorder; Putting Into Operation - Vestfrost VTS 258 Mode D'emploi

GB

Chart Recorder

Operating instruction
Maintenance:
● Regularly replace the chart and the fibre point pen.
● Replace the alkaline battery every year.

Putting into operation

1. Open the door with the key.
2. Lift the steel pen (3) into upright position
away from the chart (7).
3. Push the chart holder (6) sideways and
lift it up, and remove the chart (7)
4. Remove the plastic strip to activate the
battery.
5. Reinstall the chart (7), lower the chart
holder (6), and push it sideways.
6. Lower the steel pen carefully (3).
7. Turn the chart manually in correct start-
ing point and note the date on the chart.
It is advisable to wait 6 hours to see
the trail of the fibre point pen on the
chart.
8. Remove the protection of the pen-nib.
9. Close the door with the key.
22
3
6
7
6