Before Use; Electrical Connection - Vestfrost VTS 258 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before use

Before operating your new appliance, please
read the following instructions carefully as
they contain important information on safe-
ty, installation, operation and maintenance.
Keep the instructions for future reference.
On receipt, check to ensure that the appli-
ance has not been damaged during trans-
port. Transport damage should be reported
to the local distributor before the appliance
is put to use.
The foil on the shelves must be removed
before cleaning and before using the unit.
Clean the inside of the cabinet using warm
water with a mild detergent. Rinse with clean
water and dry thoroughly (see cleaning in-
structions). Use a soft cloth.
If the appliance has been laid down during
transport, or if it has been stored in cold sur-
roundings (colder than +5°C), it must be al-
lowed to stabilise in an upright position for
at least an hour before being switched on.
Note: If the appliance has to be laid down,
the door must face upwards and the appli-
ance must be enclosed in the original pack-
aging.

Electrical connection

Wiring and connections in power supply
systems must been all applicable (local and
national) electrical codes. Consult these
codes lengths and sizes prior to cabinet
installation.
This device complies with relevant EU
directives including Low Voltage Directive
2014/35/EU and Electromagnetic Compat-
ibility Directive 2014/30/EU
The socket should be freely accessible.
Connect the appliance only to 220/240 V
/ 50Hz alternating current via a correctly
installed earthed socket.
The socket must be fused with a 10 A or
13A fuse.
If the appliance is to be operated in a non-
European country, check on the rating plate
whether the indicated voltage and current
type correspond to the values of your mains
supply.
Data regarding voltage and obsorbed
power / current are given on the rating
plate.
The power cord may be replaced by a
technician only.
The rating plate provides various techni-
cal information as well as type and serial
number.
Product number
7
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vts 256Vts 254Vts 252

Table des Matières