Control Panel - Zanussi ZDT111 Notice D'utilisation

Installation
• Check your dishwasher for any transport
damage. Never connect a damaged ma-
chine. If your dishwasher is damaged con-
tact your supplier.
• All packaging must be removed before use.
• Any electrical and plumbing work required to
install this appliance must be carried out by
a qualified and competent person.
• For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
• Never use the dishwasher if the electrical
supply cable and water hoses are damaged;

Control panel

1 On-Off button
2 Half load button
3 Programme selection/cancel button
4 Indicator lights
5 Programme lights
4
or if the control panel, work top or plinth area
are damaged such that the inside of the ap-
pliance is freely accessible. Contact your lo-
cal Service Force centre, in order to avoid
hazard.
• All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
For electrical and water connection carefully
follow the instructions given in specific para-
graphs.
1 2 3
A B
WARNING!
5 4