Installation; Water Connection - Zanussi ZDT111 Notice D'utilisation

Rinse aid setting
Upper basket
cup racks: position A

Installation

WARNING!
Any electrical and/or plumbing work required to
install this appliance should be carried out by a
qualified electrician and/or plumber or compe-
tent person.

Water connection

WARNING!
This appliance can be connected to either a hot
(max. 60°) or cold water supply.
With a hot water supply you can have a signif-
icant reduction of energy consumption. This
however, depends on how the hot water is pro-
duced. (We suggest alternative sources of en-
Full load: 12 standard place settings
position 4 (Type III)
Cutlery basket Lower basket
ergy that are more environmentally friendly as
e.g. solar or photovoltaic panels and aeolian).
WARNING!
Only use, for connection to the water mains,
new hose-set; old hose-set must not be reused.
CAUTION!
If the machine is connected to new pipes or
pipes which have not been used for a long time,
you should run the water for a few minutes be-
fore connecting the inlet hose.
21