Technical Data; Hints For Test Institutes - Zanussi ZDT111 Notice D'utilisation

Programme
70°
65°
65° A 30'
50° (Test programme
for Test Institutes)

Technical data

Dimensions
Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Capacity

Hints for test institutes

Testing in accordance with EN 60704 must be
carried out with appliance fully loaded and us-
ing the test programme (see "Consumption val-
ues").
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
Amount of detergent required
20
Consumption values
Programme duration (in
minutes)
85-95
105-115
30
130-140
12
Width x Height x Depth (cm)
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher's door.
Minimum - Maximum
(MPa)
place settings
Full load: 12 standard place settings
Energy consumption (in
kWh)
1,8-2,0
1,5-1,7
0,9
1,0- 1,2
0,1
59,6 x 81,8-87,8 x 55,5
0,05 - 0,8
12
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (see "Consumption values").
5 g + 25 g (Type B)
Water (litres)
22-25
23-25
9
14-16
5