Elica ENT432BL Guide D'utilisation, D'entretien Et D'installation page 19

Filter saturation indicator
The hood indicates when filter maintenance is needed:
Grease filter
" "
the (17) LED lights up
Activated carbon odour filter
" "
the (17) LED flashes
Reset filter saturation
After carrying out maintenance on the filters (grease and/or activated carbon) hold
down the key;
" "
the LED turns off and the count restarts.
Activation of activated carbon odour filter saturation indicator
This indicator is normally deactivated.
To activate it, proceed as follows:
- turn on the aspiration hob by pressing
- with the aspiration motor and cooking zones off, press and hold
" "
- turns on, then off to indicate successful activation.
Deactivation of activated carbon odour filter saturation indicator
repeat the activation steps described above
" "
flashes, then turns off to indicate successful deactivation.
Automatic mode
The hood will turn on at the most suitable speed, adapting the extraction capacity
to the maximum cooking level used in the cooking zone.
Once the hob is turned off, the hood adapts its aspiration speed, gradually
decreasing it, so as to eliminate residual vapours and odours
To activate this function:
Briefly press (7), the LED "
working in this mode.
;
" (18) will light up to indicate that the hood is
;
18