Use; Cooking Containers; Energy Saving - Elica ENT432BL Guide D'utilisation, D'entretien Et D'installation

Use

The induction cooking system is based on the physical phenomenon of magnetic induction. The main characteristic of this system is the direct transfer of energy from the
generator to the pot.
Advantages:
When compared to electric hobs, your induction hob is:
- Safer: lower temperature on the glass surface.
- Faster: shorter food heating times.
- More accurate: the hob immediately reacts to your commands
- More efficient: 90% of the absorbed energy is transformed into heat. Moreover, once the pot is removed from the hob, heat transmission is immediately interrupted, avoiding
unnecessary heat losses.

Cooking containers

Use only pots bearing the symbol
Important:
to avoid permanent damage to the hob surface, do not use:
- containers with less than perfectly flat bottoms.
- metal containers with enamelled bottoms.
- containers with a rough base, to avoid scratching the hob surface.
- never place hot pots and pans on the surface of the hob's control panel
Pre-existing containers
Induction cooking uses magnetism to generate heat. Containers must therefore
contain iron. Check if the pot material is magnetic using a magnet. Pots are not
suitable if they are not magnetically detectable.
Recommended pan bottom diameters
IMPORTANT: if the pots are not correctly sized, the cooking zones will not
turn on
For details of the minimum pot diameter that needs to be used on each zone, see
the illustrated part of this manual.

Energy saving

Recommendations for best results:
- Use pots and pans with a bottom diameter equal to that of the cooking zone.
- Use only pots and pans with flat bottoms.
- Where possible, keep the lid on pots during cooking
- Cook vegetables, potatoes, etc. with a small amount of water to reduce cooking
time.
- Use a pressure cooker, it further reduces the energy consumption and cooking
time
- Place the pot in the centre of the cooking zone drawn on the hob.
12