Elica ENT432BL Guide D'utilisation, D'entretien Et D'installation page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE HOB
Before you begin, it is important to know:
All functions of this hob are designed in order to comply with the most stringent
safety regulations.
For this reason:
• Some functions will not be activated, or will be automatically deactivated, in
the absence of pots on the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically deactivated after a few
seconds when the specific function requires a further setting that has not been
selected (e.g.: "Turn the hob on" without "Selecting the cooking zone" and the
"Operating temperature", or the "Lock Function" or the "Timer" function).
Warning! In the case (for example) of prolonged use, the cooking zone may
not immediately shut down because it is in the cooling phase; the "" symbol will
appear on the cooking zone display " " to indicate the execution of this phase.
Wait for the display to turn off before approaching the cooking zone.
Cooking zone display
the cooking area display indicates:
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Temperature Manager Function
active
Child Lock Function active
Pause function
Automatic Heat UP function
Hob characteristics
Safe Activation
The product is activated only in the presence of pots on the cooking zone: the
heating process does not start or is interrupted if there are no pots, or if these are
removed.
Pot Detector
The product automatically detects the presence of pots on the cooking zones.
Safety Shut Down
For safety reasons, each cooking zone has a maximum operating time, which
depends on the maximum power level set.
Residual Heat Indicator
When one or more cooking zones shut down, the presence of residual heat is
indicated by a visual signal on the corresponding zone display, by way of the ""
symbol. " " .
Operation
Note: Before activating any functions, the desired zone must be activated
Power-on
Press (touch)
ON/OFF hob/ extractor
The indicator light will turn on to indicate that the hob/extractor is ready for use
Press again to turn off
Note: This function has priority over the others.
...
-
Selecting the cooking zone
Touch (press the Selection bar (3) corresponding to the desired cooking zone.
9 Power Levels
The hob features 9 power levels
Touch and scroll along the Selection bar (3):
to the right to increase the level of power;
to the left to decrease the level of power.
Power Booster
The product features a supplementary power level (after level
active for 10 minutes, after which the temperature returns to the previously set
value.
Touch and scroll along the Selection bar (3) (after level ) and activate the Power
Booster
The Power Booster level is shown on the display of the selected zone with the
symbol" "
Bridge Zones
Thanks to the Bridge function, the cooking zones are able to work in a combined
manner, creating a single zone with the same power level. This function allows
evenly distributed cooking with large-sized pots and pans.
The front "Master" cooking zone can be used in combination with the
corresponding "Secondary" cooking zone at the back
(to check which zones are equipped with this function, see the illustrated part of
this manual).
To activate the Bridge Function:
- simultaneously select the two cooking zones you want to use
- the Bridge indicator (20) of the "Secondary" cooking zone lights up "
- by means of the Selection bar (3) of the "Master" cooking zone it will be
possible to set the operating level (Power)
- to deactivate the Bridge Function simply repeat the same activation procedure
Temperature Manager
Temperature Manager is a function that allows to set the most suitable pre-set
temperature to achieve the desired result (see the Temperature Manager table at
the end of this chapter).
Select the desired cooking zone.
• Press once or multiple times
among the ones available:
* See the Temperature Manager at the end of this
chapter.
• Press again to turn it off.
The following symbol appears on the display of the zone working in Temperature
Manager mode "
"
Key Lock
The Key Lock allows to block the settings of the hob to prevent accidental
tampering, leaving the functions that have already been set active.
Activation:
• press
(9)
• The LED over the button will turn on, to indicate that it has been activated
Repeat the operation to deactivate.
16
), which remains
(4) to choose the most suitable level
Melting*
Warming*
"

Publicité

Table des Matières
loading

Table des Matières