FUST NOVAMATIC KS-TF315.1-IB Notice D'utilisation page 46

46
Rear spacers
In the bag with the documentation,
there are two spacers which must be
fitted as shown in the figure.
Slacken the screws and insert the spacer
under the screw head, then tighten again
the screws.
3
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
Removing the shelf holders
Your appliance is equipped with shelf re-
tainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
2
1
Door reversibility
Important! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
1. Open the doors. Unscrew the middle
Warning! Before carrying out any
operations, remove the plug from the
power socket.
hinge (m2). Remove the plastic spacer
(m1).