FUST NOVAMATIC KS-TF315.1-IB Notice D'utilisation page 47

m1
m5
m3
2. Remove the doors.
3. Remove the spacer (m6) and move to
the other side of the hinge pivot (m5).
4. Unscrew the lower hinge (b1)
5. Remove the left-hand cover pins (b4)
and move to the other side.
6. Re-screw the lower hinge (b1) on the
opposite side.
7. Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
m2
m6
m4
8. Remove the stoppers (1) and move to
the other side of the doors.
1
9. Unscrew the upper hinge pivot (t1) and
screw it on the opposite side.
10. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
11. Fit the pin of the middle hinge (m5) into
the left-hand hole of the lower door.
12. Re-insert the lower door on the lower
hinge pivot (b2).
13. Fit the upper door on the upper hinge
pivot (t1).
14. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
15. Re-screw the middle hinge (m2). Do
not forget the plastic spacer (m1) inser-
ted under the middle hinge. Make sure
that the edges of the doors run parallel
to the side edge of the appliance.
16. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
17. Remove the covers (h1). Remove the
cover pins (h2).
47